R301-303,Block E, Unis High-tech park, Langshan Road,Hi-tech Industry Park North, Nanshan District, Shenzhen, China
+86-755-27907772, +86-755-33086650
This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.
Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length
of 100 meter. It features the function of automatically identifying
the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two
interfaces, namely TX and RX. When the two sets of optical
transceiver are interfaced or connected to switch with fiber
interface, the fiber is in cross connection, namely "TX-RX",
"RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45
interface is connected to RJ-45 jack of optical transceiver through
twisted-pair. And the multi/single mode fiber is connected to SC/ST
fiber interface of the optical transceiver. Then switch on. The
corresponding LED is on for correct connection. (See the table
below for the LED indicator lamp
3. Feature
10/100/1000Base-TX to 1000Base-FX Converter
Auto-Negotiation or forced mode
Auto MDI/MDIX
Supports over-sized packets up to 1916 bytes
Plug-and-play operation
Layer 2 packet switching, store and forward Supports Link Fault Pass through (LFP)
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!
